Contacteur CC étanche en résine époxy haute tension HEV250
Looking for a high voltage epoxy resin sealed DC contactor? Check out the HEV250 for reliable and efficient performance. Buy now for your industrial needs
Aperçu
CARACTÉRISTIQUES
Suitable for switch control of new energy electric vehicles, charging facilities, photovoltaic and wind power generation systems, automotive air conditioners, communication power supplies, UPS power supplies and other electrical control circuits. This product has the characteristics of small size, large load capacity, no sparks, long service life and simple maintenance, and is deeply loved by users.
1. DC high voltage power supply: The product cavity is filled with rare mixed gas and has good arc extinguishing and cooling capabilities. Use highly conductive materials to reduce contact resistance, improve energy efficiency, and reduce heat generation.
2. Control load capacity: Supports 30A-1000A, and the operating voltage range is 5-1000VDC. suitable for high-voltage battery systems to ensure safe and stable current switching.
3. Safety: Using insulating structure, it can work in flammable or hazardous environments, and the coils and contacts will not be oxidized or polluted. It has good high temperature resistance, adapts to various working environments, and extends the service life.
4. Small size, light weight, low power consumption: Compared with similar products, it has obvious advantages. Small size design, easy to install in limited space, meeting the design needs of modern electric vehicles.
This product complies with the standard requirements of JB2286-78, JB3974-85, YD/585-92, YD/T512-92 and other standards. It has been inspected by the factory and relevant testing units and conforms to the standard specifications. Users can use it with confidence for many years to meet user needs to the greatest extent. , reliable quality.
IMPLICATION DU MODÈLE SAYOON
| HEV | 250 | -7 | A | D | X | L | -□ | ■ | /12V |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 1 | Product type: HEV one group circuits; HEVJ two group circuit |
| 2 | Courant nominal |
| 3 | Contact Rated Voltage: 1-200V; 7-1000V |
| 4 | Circuit structure: A-Normally open; B-Normally closed; F-Normally open with one auxiliary switch (the auxiliary switch and main contact have the same structure); G-One normally closed with one auxiliary (auxiliary switch and main contact have the same structure). (for other auxiliary switch structures, add 2 or 3 numbers after the model to describe the auxiliary switch structure) |
| 5 | Coil type: D-Single coil; H-With coil economizer; K- Deux rétentions magnétiques articulées (bobine unique, auto-verrouillage à deux articulations); 2K-Three joint magnetic retention (Double coil, Three joint self-locking); P-Signal control; R-Built-in pre charging type [relay drive] (the left digit of the pre charging function is the pre charging delay time, used to control the coil, the right digit is the resistance value with resistance); Y-External pre charging [MOS driver] (The left digit of the pre charging function is the pre charging delay time, and the right digit is used as a lead for controlling the coil. If it is greater than 1, it is the resistance value of the live resistance) |
| 6 | Coil outgoing mode: X-Wire (390mm); O-Other |
| 7 | Mounting bracket type: L-Vertical (default); M-Horizontale |
| 8 | None: Auxiliary switch and main contact have the same structure (default); 2: The structure of auxiliary switch and main contact is opposite; 3: Special auxiliary switch structure |
| 9 | Other special functions: V-With capacitive type load; N-No polarity |
| 10 | Tension nominale de la bobine : 12V, 24V, 36V, 48V, 60V, 72V, etc. |
UTILISATIONS
The advantage of this utility model is that it is equipped with a normally open contact and is suitable for charging piles, electric four-wheel vehicles, new energy vehicles, energy-saving and environmental protection systems, road traffic lighting systems, programmable power supplies and uninterruptible power supply equipment.
TECHNICAL PARAMETERS: (Version 2.97)
|
Type de produit SAYOON |
HEV250 |
| Formulaire de contact | 1 NO(SPST-NO) or 1NC(SPST-NC) |
| Tension nominale de la bobine (V CC) | DC6V,12V,24V,36V,48V,60V,72V,84V,120V,150V,DC220V,AC220V etc. |
| Tension de contact (V CC) | 200V,1000V |
| Contact circuit rated load current (DC-1) | 250A |
| Chute de tension typique aux bornes des contacts pour 100 A | ≯80mV |
| La tension de collage de refroidissement à (20±5)℃ (V) | ≯70% |
| Tension de décollage à (20±5)℃ (V) | ≯35%,≮5% |
| Plage de tension de fonctionnement de la bobine à 40 °C | 0,8-1,2 µs |
| Temps de chute (contacts N.O. ouverts) | 30ms |
| Temps d'enclenchement (contacts N.O. à la fermeture) | 5 ms |
| Temps de rebond maximal pour la connexion de contact | 10 ms |
| Temps de rebond maximal pour la déconnexion de contact | 7ms |
| Résistance d'isolement | 100MΩ |
| La force électrique à résister | 50Hz/60Hz 2200VAC 1minute |
| Courants de défaut typiques pouvant être coupés | 1000A/5ms at 48V DC |
| Puissance de la bobine (W) | D: 8-20; H: Start 30-50, Keep 1.5-4 |
| Élévation de température de la bobine (K) | ≤55 |
| Élévation de température sur la borne de sortie (K) | ≤ 65 |
| Vie électrique | 20 000 fois |
| Vie mécanique | 300 000 fois |
| Spécification des travaux | Continu |
| Matériau de contact | Alloy |
| Temps de démarrage (max) | 130ms |
| Maximum switching current | 2000A 320VDC (more than once) |
| Maximum switching power | 640kW |
| Type de terminal de charge | Vis M8 |
| Type de borne de bobine | 0.3 square silicone wire, 390mm long |
| Charge nominale du contact auxiliaire (en option) | 3A/30VDC |
| Certification d'organisme de test | CCC, CE, FCC, RoHS |
Remarque : Compte tenu des différents environnements d'utilisation des clients qui nécessitent des priorités fonctionnelles différentes, et afin d'améliorer les propriétés globales de nos produits, SAYOON peut ajuster les paramètres de la bobine, l'élévation de température, etc. Les paramètres ci-dessus sont fournis à titre indicatif uniquement. Pour plus de détails, veuillez vous référer aux directives de sélection et d'utilisation du contacteur CC SAYOON.
CARACTÉRISTIQUE DE CHARGE
SCHÉMA D'INSTALLATION
SCHÉMA ÉLECTRIQUE
COURBE DE TEMPÉRATURE DE LA BOBINE
APTITUDE MÉCANIQUE et UTILISATION de l'ENVIRONNEMENT
| Couple de serrage du contact principal M8 (N.m) | >9,0 approprié |
| Coil lead mode | Wire dipping tin (red positive and black negative) |
| Température ambiante | -40~+85℃ |
| Humidité relative | +20 °C 98% |
| Fréquence de vibration à la position fixe | 3G, 1 à 50 Hz amplitude 0,5 mm |
| Commotion cérébrale | (60 à 100) fois/minute, accélération ≤ 4 g |
| Altitude | 2000m |
| Sens d'installation | Aléatoire |
| Protection internationale | IP68 |
INSTRUCTION DE COMMANDE
|
Type de produit SAYOON |
HEV250 |
| NUW. | 710g |
| Type de support de fixation | L Vertical(default),M Horizontal |
When placing your order, please provide the following information: name, complete model number, control coil voltage specification, mounting frame type, whether auxiliary contacts are required and order quantity. For example: 100 pieces of HV DC contactor HEV200-□-□/24V means the rated load current is 200A, no auxiliary contacts, the default mounting bracket, the coil control voltage is 24V, order 100 pieces. If you need products with special voltage specifications, users can make special orders.
Produits associés
Demander un devis personnalisé
Ce produit vous intéresse ? Remplissez le formulaire ci-dessous et notre équipe commerciale vous contactera dans les 24 heures.
+86 130 5791 2357
sayoon@sayoon.com