{"id":5326,"date":"2026-11-16T14:00:00","date_gmt":"2026-11-16T06:00:00","guid":{"rendered":"https:\/\/sayoon-dc.com\/?p=5326"},"modified":"2026-11-16T14:00:00","modified_gmt":"2026-11-16T06:00:00","slug":"dc-contactor-inspection-calculation-software-validation","status":"publish","type":"post","link":"https:\/\/sayoon-dc.com\/ja\/blog\/dc-contactor-inspection-calculation-software-validation\/","title":{"rendered":"DC Contactor Inspection Calculation Software: Validation Review"},"content":{"rendered":"<p>DC contactor inspection calculation software validation checks whether the implemented calculation is suitable for its stated inspection purpose, using controlled inputs, independently established expected results and documented review. A working spreadsheet is not sufficient evidence. Define the formula, units, valid range, exception behavior and release decision before testing the tool. For contactor procurement, this helps prevent a correct measurement from becoming an incorrect reported resistance, statistic or acceptance result. It does not validate the measurement method itself or establish electrical ratings for a product.<\/p>\n<h2>Define the calculation and its intended use<\/h2>\n<p>Inventory the calculations that influence the report. A tool may convert units, calculate resistance from measured voltage and current, summarize repeat readings or compare a result with an approved criterion. Identify inputs and outputs for each function. Record whether the function merely supports analysis or directly controls a shipment-release decision, because the consequence of a defect affects the review effort needed.<\/p>\n<p>Write the requirement in words and mathematics before copying an existing workbook. State which quantities are measured, the required units, valid input domain, reporting convention and source of the acceptance rule. Identify the owner who can resolve ambiguity. A programmer cannot decide whether a missing value should be treated as zero simply by choosing the behavior that produces the cleanest spreadsheet.<\/p>\n<h2>Separate calculation accuracy from measurement validity<\/h2>\n<p>Consider an illustrative resistance calculation, R = V\/I. If an approved method supplies a voltage drop of 0.024 V and a current of 20 A, the arithmetic yields 0.0012 ohm, or 1.2 milliohm. These numbers illustrate units and software behavior only; they are not SAYOON specifications, prescribed test conditions or an acceptance limit for any contactor.<\/p>\n<p>The same formula can return a convincing number when the probes are connected to the wrong points or the current reading is unsuitable. Software checks do not establish the validity of the electrical setup. The measurement procedure, energy controls and product-specific test conditions require separate competent review. Keep that boundary visible in the report rather than describing successful arithmetic testing as complete test-system validation.<\/p>\n<figure><img decoding=\"async\" loading=\"lazy\" src=\"https:\/\/sayoon-dc.com\/wp-content\/uploads\/2026\/11\/dc-contactor-inspection-calculation-software-validation-bodyOne-20261115-daily.png\" alt=\"CZW600A Normally Open DC Contactor with expected results review headings\"><figcaption>Define units, valid inputs and independent expected results before checking calculations.<\/figcaption><\/figure>\n<h2>Build an independent expected-result set<\/h2>\n<div class=\"sy-table-wrap\">\n<table>\n<thead>\n<tr>\n<th>Evidence field<\/th>\n<th>Required information<\/th>\n<th>Review purpose<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Normal input<\/td>\n<td>Simple values with an independent answer<\/td>\n<td>Verify the intended formula and unit<\/td>\n<\/tr>\n<tr>\n<td>Boundary<\/td>\n<td>Equality and values around the approved limit<\/td>\n<td>Check the specified comparison behavior<\/td>\n<\/tr>\n<tr>\n<td>Invalid input<\/td>\n<td>Missing values and zero divisor where relevant<\/td>\n<td>Require a controlled exception<\/td>\n<\/tr>\n<tr>\n<td>Data path<\/td>\n<td>Distinct sample IDs, imports and exports<\/td>\n<td>Preserve the association between result and sample<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Planning checklist based on the scoped <a rel=\"noopener nofollow\" href=\"https:\/\/www.nist.gov\/system\/files\/documents\/2018\/01\/12\/procedure-for-software-qa-20180101.pdf\" target=\"_blank\">technical reference<\/a> and the applicable purchase documents; no universal acceptance limits are implied.<\/p>\n<p>Derive expected results independently of the implementation being checked. A second spreadsheet created by copying the original formula can preserve the same defect. Use simple hand-checkable examples for conversions and arithmetic, or a suitable independent reference calculation for more complex functions. Document the reasoning, units and permissible numerical comparison before running the candidate software.<\/p>\n<p>NIST Statistical Reference Datasets provide benchmark datasets and computational results for specified statistical problems. Select a dataset that matches the function being evaluated, including the statistical convention and calculation type. Passing one summary-statistics benchmark does not establish correctness of a resistance conversion, report export or acceptance comparator. Record exactly which functions the benchmark supports and what remains outside its scope.<\/p>\n<h2>Cover normal inputs and boundary behavior<\/h2>\n<p>Begin with a small set of ordinary values that a reviewer can verify. Add zero, negative, missing and out-of-range inputs where meaningful. For the illustrative V\/I function, zero current should produce a controlled invalid-result condition rather than an apparently valid resistance. Decide how negative readings are interpreted by the actual method; do not silently discard a sign that may reveal an input or connection problem.<\/p>\n<p>Test values around an applicable decision boundary using the approved rule. Include equality and values on either side, with sufficient internal precision to expose premature rounding. Keep the rule itself under review: a perfectly implemented comparison against the wrong drawing revision remains wrong. The objective is evidence that the software follows an approved instruction, not evidence that a convenient output can be made to appear.<\/p>\n<h2>Verify units, imports and data associations<\/h2>\n<p>Unit conversion deserves explicit cases. Volts and millivolts, amperes and milliamperes, ohms and milliohms can create large errors when labels and numeric values disagree. Record the expected numeric value and displayed unit together. Test an import whose columns have moved, a missing header and a file containing a different decimal separator if those situations are realistic for the actual workflow.<\/p>\n<p>Also test which observation belongs to which contactor sample. A formula can be numerically correct while a sorting operation associates the result with the wrong serial or lot. Include a multi-row case with distinct identifiers and easily distinguishable expected results. Confirm that filtering, copying, exporting and reopening the report preserve those relationships. These checks address the full calculation path rather than isolated cells.<\/p>\n<h2>Control formulas and editable inputs<\/h2>\n<p>Make permitted input locations clear and protect formula locations against accidental changes using appropriate system controls. Protection is useful, but it is not a substitute for verifying the formulas. Document links to external workbooks, hidden sheets, scripts and lookup tables that influence the result. A reviewer should be able to identify all dependencies needed to reproduce the calculation.<\/p>\n<p>For a template, preserve a controlled master and identify the released revision. Confirm that users begin from that version and that a completed record identifies the version actually used. If operators create local copies, define how updates reach them and how obsolete templates are withdrawn. Otherwise the software-validation evidence may describe a different calculation from the one used for the delivered inspection report.<\/p>\n<h2>Include failure cases in the release decision<\/h2>\n<p>Record actual results beside expected results, including error messages and blocked operations. Investigate discrepancies before release. A failed case may reveal a software defect, an incorrect expected result or an unclear requirement. Resolve the cause and retain the explanation instead of changing the expected answer merely to make the test summary pass.<\/p>\n<p>Repeat affected cases after a repair and evaluate whether other functions share the same logic. Preserve the before-and-after evidence with the software version. A record containing only the final successful screenshot hides the problem and the scope of the correction. The reviewer should understand which defect was fixed, which tests were repeated and why the remaining test scope is justified.<\/p>\n<figure><img decoding=\"async\" loading=\"lazy\" src=\"https:\/\/sayoon-dc.com\/wp-content\/uploads\/2026\/11\/dc-contactor-inspection-calculation-software-validation-bodyTwo-20261115-daily.png\" alt=\"CZW600A Normally Open DC Contactor with change review review headings\"><figcaption>Retain test cases and assess changes to formulas, imports and dependent report fields.<\/figcaption><\/figure>\n<h2>Assess changes and recheck affected functions<\/h2>\n<p>Changes include formula edits, new lookup data, different import formats, spreadsheet application updates and altered report layouts that affect data presentation. Review the impact before deployment. Define which tests need repetition and whether previously issued results require evaluation. A cosmetic label change and a change to unit conversion have different consequences, but both should be assessed rather than dismissed automatically.<\/p>\n<p>Keep representative regression cases so earlier successful behavior can be checked again. NIST&#8217;s software quality-assurance procedure discusses lifecycle controls and verification and validation for laboratory software, including spreadsheets. Use that material within its laboratory scope as a planning reference. It does not grant certification to a particular workbook or remove the organization&#8217;s responsibility for the implemented inspection workflow.<\/p>\n<h2>Retain a review package that can be reproduced<\/h2>\n<p>The package should identify the intended function, software revision, execution environment, input files, expected results, actual results, deviations and approval. Keep an accessible copy of the released tool or an adequately controlled reference to it. Include dependencies that would otherwise disappear, such as external lookup tables. A reviewer must be able to understand the evidence after the original author leaves.<\/p>\n<p>State the conclusion narrowly: for example, the identified version correctly performs specified conversions and statistical calculations for the tested input domain. List excluded functions and conditions. Avoid broad claims such as fully validated contactor testing system when the work evaluated only one calculation. The limits of the conclusion are part of its usefulness to the purchasing decision.<\/p>\n<h2>Connect the tool to the contactor inquiry<\/h2>\n<p>When requesting inspection evidence from SAYOON, describe the exact contactor configuration and the characteristic that must be evaluated. Agree the measurement method, result units, acceptance source and report contents separately from software checks. Ask whether calculated results identify their input data and method so a technical reviewer can follow the conclusion without receiving unrelated proprietary software.<\/p>\n<p>Before shipment release, confirm that the report uses the approved product requirement and that unresolved calculation exceptions are visible. If a software error is later found, identify affected records by version and function, then assess technical consequences using the proper review process. The useful outcome is a reproducible calculation supporting a defined inspection, with no wider product approval inferred.<\/p>\n<h2>Educational video<\/h2>\n<p>CS50 explains unit testing and expected results using Python, as educational background to checking calculation functions; this programming lesson does not approve a laboratory or establish contactor test conditions. This educational background does not assess a particular contactor or approve an equipment design.<\/p>\n<div style=\"aspect-ratio:16\/9\"><iframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/tIrcxwLqzjQ\" title=\"CS50P - Lecture 5 - Unit Tests \u2014 CS50\" loading=\"lazy\" allowfullscreen style=\"border:0;width:100%;height:100%\"><\/iframe><\/div>\n<p><a rel=\"noopener nofollow\" href=\"https:\/\/www.youtube.com\/watch?v=tIrcxwLqzjQ\" target=\"_blank\">Watch the educational video<\/a><\/p>\n<h2>Frequently asked questions<\/h2>\n<h3>Can a spreadsheet be used for contactor inspection calculations?<\/h3>\n<p>Yes, when its intended functions, inputs, formulas, controls and results are appropriately checked and maintained for the agreed purpose. Familiar software does not remove the need for evidence.<\/p>\n<h3>Does a NIST reference dataset validate the whole workbook?<\/h3>\n<p>No. It supports evaluation of the particular matching statistical calculation. Imports, units, data associations, report output and acceptance logic need their own relevant checks.<\/p>\n<h3>Should an invalid input be converted to zero?<\/h3>\n<p>Only if that behavior is explicitly justified by the approved requirement. Missing observations or zero divisors ordinarily need an identifiable exception rather than a misleading calculated result.<\/p>\n<h3>When should calculation checks be repeated?<\/h3>\n<p>Assess changes to formulas, dependencies, input formats and the execution environment. Repeat affected checks and suitable regression cases before relying on the changed version for its intended use.<\/p>\n<h2>Product and related guides<\/h2>\n<p>Discuss the application using the <a href=\"https:\/\/sayoon-dc.com\/product\/czw600a-normally-open-dc-contactor\/\">CZW600A Normally Open DC Contactor<\/a> and the <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-selection-guide-key-factors-for-reliable-motor-control\/\">DC contactor selection guide<\/a>. Related reading: <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-process-capability-cp-cpk-review\/\">DC Contactor Process Capability: Review Cp and Cpk<\/a>, <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-measurement-uncertainty-decision-rule\/\">DC Contactor Measurement Uncertainty: Decision Rule Review<\/a>.<\/p>\n<h2>Technical references<\/h2>\n<ul>\n<li><a rel=\"noopener nofollow\" href=\"https:\/\/www.nist.gov\/system\/files\/documents\/2018\/01\/12\/procedure-for-software-qa-20180101.pdf\" target=\"_blank\">NIST: laboratory software quality assurance procedure<\/a><\/li>\n<li><a rel=\"noopener nofollow\" href=\"https:\/\/www.itl.nist.gov\/div898\/strd\/\" target=\"_blank\">NIST: Statistical Reference Datasets<\/a><\/li>\n<\/ul>\n<p>Apply each reference within its stated scope. General methods do not establish a product rating or project acceptance.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can a spreadsheet be used for contactor inspection calculations?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, when its intended functions, inputs, formulas, controls and results are appropriately checked and maintained for the agreed purpose. Familiar software does not remove the need for evidence.\"}}, {\"@type\": \"Question\", \"name\": \"Does a NIST reference dataset validate the whole workbook?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It supports evaluation of the particular matching statistical calculation. Imports, units, data associations, report output and acceptance logic need their own relevant checks.\"}}, {\"@type\": \"Question\", \"name\": \"Should an invalid input be converted to zero?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only if that behavior is explicitly justified by the approved requirement. Missing observations or zero divisors ordinarily need an identifiable exception rather than a misleading calculated result.\"}}, {\"@type\": \"Question\", \"name\": \"When should calculation checks be repeated?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Assess changes to formulas, dependencies, input formats and the execution environment. Repeat affected checks and suitable regression cases before relying on the changed version for its intended use.\"}}]}<\/script><\/p>\n<style>.sy-pro-article-main{min-width:0;max-width:100%}.sy-pro-article-main>*{max-width:100%}.sy-table-wrap{max-width:100%;overflow-x:auto}.sy-table-wrap table{min-width:650px;width:100%;border-collapse:collapse}.sy-table-wrap td,.sy-table-wrap th{padding:12px;border:1px solid #d5dce4;text-align:left;vertical-align:top}figure{margin:24px 0}figure img{max-width:100%;height:auto}<\/style>\n","protected":false},"excerpt":{"rendered":"<p>Check DC contactor inspection calculation software with independent expected results, units, invalid inputs, controlled formulas and change review.<\/p>","protected":false},"author":4,"featured_media":5323,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[61],"class_list":["post-5326","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-dc-contactor-engineering"],"blocksy_meta":{"styles_descriptor":{"styles":{"desktop":"","tablet":"","mobile":""},"google_fonts":[],"version":7}},"_links":{"self":[{"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/posts\/5326","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/comments?post=5326"}],"version-history":[{"count":1,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/posts\/5326\/revisions"}],"predecessor-version":[{"id":5347,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/posts\/5326\/revisions\/5347"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/media\/5323"}],"wp:attachment":[{"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/media?parent=5326"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/categories?post=5326"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sayoon-dc.com\/ja\/wp-json\/wp\/v2\/tags?post=5326"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}