HEV50 고전압 에폭시 수지 밀봉형 DC 접촉기
Looking for HEV50 High Voltage Epoxy Resin Sealed DC Contactor? Find top-quality sealed contactors for high voltage applications. Order now!
개요
주요 기능
This product is suitable for switch control of new energy electric vehicles, charging facilities, photovoltaic power generation, wind power generation systems, automotive air conditioners, communication power supplies, UPS power supplies and other electrical control circuits. It has a compact size and large load capacity, can operate safely without sparks, has a long service life, and is easy to maintain, making it deeply loved by users.
Specifically, this product has the following significant features: First, in terms of DC high-voltage power supply, the product is filled with rare mixed gases and has good arc cooling capabilities; secondly, in terms of load control capability, the product supports 30A to 1000A The load has an operating voltage range of 5 to 1000VDC, which can meet a variety of application needs; thirdly, in terms of safety, the product adopts an insulating structure and can work safely in flammable or hazardous environments, and the coils and contacts will not oxidize. or pollution; finally, compared with similar products, this product is small in size, light in weight, low in power consumption, and has a higher cost performance.
In addition, this product is produced in strict accordance with JB2286-78, JB3974-85, YD/585-92, YD/T512-92 and other standards, and has been inspected by the factory and relevant testing units to ensure compliance with standard specifications. After years of use, user feedback has been good, and the product quality is reliable and can meet the needs of users to the greatest extent.
사요온 모델 시사점
| HEV | 50 | -7 | A | D | X | L | □ | /12V |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| 1 | Product type: HEV one group circuits; HEVJ two group circuit |
| 2 | 정격 전류 |
| 3 | Contact Rated Voltage: 1-200V; 7-1000V |
| 4 | Circuit structure: A-Normally open; B-Normally closed |
| 5 | Coil type: D-Single coil; H-With coil economizer; K- 2절 고정 자기 유지 (단일 코일, 2절 자기 잠금); 2K-Three joint magnetic retention (Double coil, Three joint self-locking); P-Signal control; R-Built-in pre charging type [relay drive] (the left digit of the pre charging function is the pre charging delay time, used to control the coil, the right digit is the resistance value with resistance); Y-External pre charging [MOS driver] (The left digit of the pre charging function is the pre charging delay time, and the right digit is used as a lead for controlling the coil. If it is greater than 1, it is the resistance value of the live resistance) |
| 6 | Coil outgoing mode: X-Wire (390mm); O-Other |
| 7 | Mounting bracket type: L-Vertical (default); M-수평의 |
| 8 | Other special functions: V-With capacitive type load; N-No polarity |
| 9 | 코일 정격 전압: 12V, 24V, 36V, 48V, 60V, 72V 등. |
용도
This utility model has several significant advantages, one of the main features being that it is equipped with a normally open contact. This design makes it particularly suitable for a variety of application scenarios, including charging piles, electric four-wheel vehicles, new energy vehicles, energy-saving and environmental protection systems, road traffic lighting systems, programmable power supplies, and uninterruptible power supply equipment. Through this flexible applicability, the product can meet the needs of modern society for green travel and sustainable development.
The design of normally open contacts not only improves the operational convenience of the device, but also ensures efficient performance in various working environments. Whether in urban charging infrastructure or in industrial applications that require stable power supply, this utility model can give full play to its unique advantages and provide reliable power control solutions. Through continuous optimization and innovation, this product has shown good prospects and broad application potential in promoting energy transformation and environmental protection.
TECHNICAL PARAMETERS: (Version 2.92)
|
사요온 제품 유형 |
HEV50 |
| 문의하기 | 1 NO(SPST-NO) or 1NC(SPST-NC) |
| 코일 정격 전압 (DC V) | 6V, 12V, 24V, 36V, 48V, 60V, 72V, 84V, 120V, 150V 등. |
| 접촉 전압 (DC V) | 200V,1000V |
| Contact circuit rated load current (DC-1) | 50A |
| Typical voltage drop across contacts per 50A | 80mV 초과 |
| (20±5)℃에서의 복귀 전압 (V) | ≯70% |
| (20±5)℃에서의 복귀 전압 (V) | ≯35%,≮5% |
| Working voltage range of 40℃ coil | 0.8-1.2마이크로초 |
| 드롭아웃 시간(접점이 개방될 때까지의 무접점 시간) | 20ms |
| 동작 시간 (상시개방 접점이 닫히기까지) | 10ms |
| 접촉 연결의 최대 바운스 시간 | 10ms |
| 접점 개방 시 최대 바운스 시간 | 7ms |
| 절연저항 | 100MΩ |
| 저항하는 전기적 강도 | 50Hz/60Hz 2200VAC 1minute |
| 차단 가능한 일반적인 고장 전류 | 500A/5ms at 48V DC |
| 코일 전력 (W) | D: 3-7; H: Start 3-7, Keep 0.5-1.5 |
| 코일의 온도 상승 (K) | ≤55 |
| 인출 단자 온도 상승 (K) | ≤65 |
| 전기적 삶 | 2만 번 |
| 기계 생명체 | 30만 번 |
| 작업 사양서 | 연속적인 |
| 접촉 재질 | Alloy |
| 돌입 시간 (최대) | 130ms |
| Maximum switching current | 400A 320VDC (more than once) |
| Maximum switching power | 130kW |
| 터미널 유형 로드 | M5 나사 |
| 코일 단자 타입 | 0.3 square silicone wire, 390mm long |
| 시험 기관 인증 | CCC,CE,FCC,RoHS |
Note: Because customers’ usage environments vary, the focus on functionality will vary. In order to improve the comprehensive performance of our products, SAYOON may adjust coil parameters, temperature rise and other related indicators according to specific needs. It should be emphasized that the above parameters are for reference only. For specific applications and selections, please refer to the SAYOON DC Contactor Selection and Use Guide. These guides will provide users with detailed information to help them make the best choice based on the actual situation, thereby ensuring the best performance and reliability of the product in different environments. We are always striving to optimize based on our customers’ needs to ensure that each user receives the best solution for their specific application.
부하 특성 곡선
설치도
배선도
COIL TEMPERATURE CURVE
기계적 능력과 환경 이용
| Contact lead M5 tightening torque (N.m) | 2.5 초과 적절 |
| Coil lead mode | Wire dipping tin (red positive and black negative) |
| 주위 온도 | -40~+85℃ |
| 상대습도 | +20℃ 98% |
| 고정 위치에서의 진동 주파수 | 3G, 1~50Hz 진폭 0.5mm |
| 뇌진탕 | (60~100)회/분, 가속도≤4g |
| 고도 | 2000m |
| 설치 방향 | 무작위 |
| 국제 보호 | IP68 |
주문 지침
|
사요온 제품 유형 |
HEV50 |
| U.N.W. | 172g |
| 마운팅 브래킷 형식 | L Vertical(default),M Horizontal |
When placing an order, please be sure to clarify the following information: product name, complete model, control coil voltage specifications, mounting frame type, whether auxiliary contacts are required, and order quantity, etc. This information is critical to ensuring the accuracy and timely processing of orders. For example, you can state your order like this: HV DC Contactor HEV50-□-□/24V 100pcs, which means that the load you need has a rated current of 50A and no auxiliary contacts are required. The mounting bracket is selected by default and the control coil voltage is 24V, the order quantity is 100 pieces. In addition, if you have special voltage specification requirements, special orders can be made to meet your specific application requirements. We will do our best to provide you with the products you need and ensure they meet your technical specifications and usage environment.
관련 상품
맞춤 견적 요청
이 제품에 관심이 있으십니까? 아래 양식을 작성해 주시면 당사 영업팀에서 24시간 이내에 연락드리겠습니다.
+86 130 5791 2357
sayoon@sayoon.com