SEV800AH High Voltage Epoxy Resin Sealed DC Contactor

SEV800AH 고전압 에폭시 수지 밀봉 DC 접촉기

Discover the SEV800AH HV DC Contactor for reliable high-voltage applications. Ideal for efficient power management. Explore specifications and purchase now!
개요

주요 기능

Suitable for new energy electric vehicles, charging facilities, photovoltaic, wind power generation systems, automotive air conditioning, communication power, UPS, power and other electrical control circuit of the switch control, with small size, large load capacity, no spark, long service life, maintenance simple and other characteristics, by users. 1 DC high voltage power: the product cavity filled with rare mixed gas, arc cooling capacity, 2 control load capacity: with 30A-1000A, working voltage range of 5-1000VDC load capacity; 3 safety: insulation structure, can be in flammable or hazardous environment work, coil and contacts will not oxidation and pollution; 4, compared with similar products small size, light weight, power consumption. The product in accordance with the standard JB2286-78, JB3974-85, YD / 585-92, YD / T512-92 requirements; after the factory and relevant test unit test, meet the requirements of the standard specification, users use for many years, maximum to meet user needs, quality and reliable.

사요온 모델 시사점

SEV

800

A

H

X

L

-□

■

/12V

1

2

3

4

5

6

7

8

9

1

제품 유형

2

정격 전류

3

Circuit structure: A-Normally open; B-Normally closed; F-Normally open with one auxiliary switch (the auxiliary switch and main contact have the same structure); G-One normally closed with one auxiliary (auxiliary switch and main contact have the same structure). (for other auxiliary switch structures, add 2 or 3 numbers after the model to describe the auxiliary switch structure)

4

Coil type: H-With coil economizer; K- 2절 고정 자기 유지 (단일 코일, 2절 자기 잠금); 2K-Three joint magnetic retention (Double coil, Three joint self-locking); P-Signal control

5

Coil outgoing mode: X-Wire (390mm); P-Spade terminals (4.8); W-Thread (M4); O-Other

6

Mounting bracket type: L-Vertical (default)

7

없음: Auxiliary switch and main contact have the same structure (default); -2: The structure of auxiliary switch and main contact is opposite; -3: Special auxiliary switch structure

8

Other special functions: V-With capacitive type load; N-No polarity

9

코일 정격 전압: 12V, 24V, 48V, 9-36V, 48-72V etc.

용도

The utility model has the advantages that the utility model is provided with one normally open contact, which is suitable for charging piles, electric four wheeled vehicles, new energy vehicles, energy saving and environmental protection systems, road traffic lighting systems, programmable power supply and uninterruptible power supply equipment.

TECHNICAL PARAMETERS: (Version 1.09)

 사요온 제품 유형

 SEV800AH

 문의하기  1 NO(SPST-NO) or 1NC(SPST-NC)
 코일 정격 전압 (DC V)  DC6V,12V,24V,36V,48V,60V,72V,84V,120V,150V,DC220V,AC220V etc.
 접촉 전압 (DC V)  5-1000V
 Contact circuit rated load current (DC-1)  800A
 100A당 전형적인 접점 간 전압 강하  80mV 초과
 the cooling pull-in voltage at (20±5)℃ (V)  ≯70%
 the cooling drop-out voltage at (20±5)℃ (V)  ≯35%,≮5%
 40℃ 코일의 작동 전압 범위  0.8-1.2마이크로초
 드롭아웃 시간(접점이 개방될 때까지의 무접점 시간)  80ms
 동작 시간 (상시개방 접점이 닫히기까지)  20ms
 접촉 연결의 최대 바운스 시간  10ms
 접점 개방 시 최대 바운스 시간  7ms
 절연저항  100MΩ
 저항하는 전기적 강도  50Hz/60Hz 2200VAC 1minute
 차단 가능한 일반적인 고장 전류  48V DC에서 1500A/5ms
 코일 전력 (W)  H: Start 30-60, Keep 4-10
 코일의 온도 상승 (K)  ≤45
 인출 단자 온도 상승 (K)  ≤65
 전기적 삶  2만 번
 기계 생명체  30만 번
 작업 사양서  연속적인
 접촉 재질  Alloy
 돌입 시간 (최대)  130ms
 Maximum switching current  3000A 320VDC (more than once)
 Maximum switching power  1000kW
 터미널 유형 로드  M10 나사
 코일 단자 타입  0.3 square silicone wire, 390mm long
 보조 접점 정격 부하 (선택 사항)  3A/30VDC
 시험 기관 인증  CE,FCC,RoHS

 

고객의 다양한 사용 환경에 따라 기능적 중점이 달라질 수 있으며, 제품의 종합적인 성능을 향상시키기 위해 사윤(sayoon)은 코일 파라미터, 온도 상승 등을 조정할 수 있습니다. 상기 파라미터는 참고용이며, 자세한 내용은 SAYOON 직류 접촉기선택 및 사용 지침을 참조하시기 바랍니다.

부하 특성 곡선

  • HEV800 HV DC Contactor detail (3)
  • HEV800 HV DC Contactor detail (2)

설치도

SEV600AH HV DC Contactor detail (4)

배선도

SEV200AH HV DC Contactor detail (5)

COIL TEMPERATURE CURVE

SEV200AH HV DC Contactor detail (1)

기계적 능력과 환경 이용

 접점 리드 M10 조임 토크 (N.m)  20.5 초과 적절함
 Coil lead mode  Wire dipping tin (red positive and black negative)
 주위 온도  -40~+85℃
 상대습도  +20℃ 98%
 고정 위치에서의 진동 주파수  3G, 1~50Hz 진폭 0.5mm
 뇌진탕  (60~100)회/분, 가속도≤4g
 고도  2000m
 설치 방향  무작위
 국제 보호  IP68

주문 지침

 사요온 제품 유형

 SEV800AH

 U.N.W.  1400g
 마운팅 브래킷 형식  L Vertical(default)
When ordering, please state the following: name, full model, control coil voltage specification, installation frame type, whether with auxiliary contact, order quantity. For example: HV DC Contactor SEV800AH-□-□/24V 100pcs, indicating the load rated current 800A, without auxiliary contact, default mounting bracket, coil control voltage 24V purchase 100pcs. Special voltage specification products, such as user needs can be special order.

맞춤 견적 요청

이 제품에 관심이 있으십니까? 아래 양식을 작성해 주시면 당사 영업팀에서 24시간 이내에 연락드리겠습니다.

문의하기
왓츠앱
WhatsApp QR 코드
위챗
위챗 코드
전화기
+86 130 5791 2357
이메일
sayoon@sayoon.com