HEV600 High Voltage Epoxy Resin Sealed DC Contactor

Высоковольтный контактор постоянного тока HEV600, герметизированный эпоксидной смолой

Looking for a high voltage epoxy resin sealed DC contactor? Check out the HEV600 for reliable and efficient performance. Contact us for more information

Запросить расчет стоимости

Обзор

ХАРАКТЕРИСТИКИ

Suitable for new energy electric vehicles, charging facilities, photovoltaic systems, wind power generation systems, automotive air conditioning, communication power, UPS systems, and other electrical control circuits, this switch control device features a compact size, large load capacity, no spark generation, a long service life, and simple maintenance, making it highly favored by users.

1. DC High Voltage Power: The product cavity is filled with a rare mixed gas, enhancing its arc cooling capacity.

2. Control Load Capacity: It supports a load capacity ranging from 30A to 1000A, with a working voltage range of 5-1000VDC.

3. Safety: The insulation structure allows it to operate safely in flammable or hazardous environments, ensuring that the coil and contacts will not oxidize or become contaminated.

4. Compact Design: Compared to similar products, it boasts a smaller size, lighter weight, and lower power consumption.

The product complies with the standards JB2286-78, JB3974-85, YD / 585-92, and YD / T512-92. After undergoing rigorous testing by the factory and relevant testing units, it meets all standard specifications, ensuring that it can be reliably used by customers for many years, effectively addressing their needs with high quality and reliability.

Значение модели Сайюна

HEV	600	-7	A	D	X	L	-□	■	/12V
1	2	3	4	5	6	7	8	9	10

1	Product type: HEV one group circuits; HEVJ two group circuit
2	Номинальный ток
3	Contact Rated Voltage: 1-200V; 7-1000V
4	Circuit structure: A-Normally open; B-Normally closed; F-Normally open with one auxiliary switch (the auxiliary switch and main contact have the same structure); G-One normally closed with one auxiliary (auxiliary switch and main contact have the same structure). (for other auxiliary switch structures, add 2 or 3 numbers after the model to describe the auxiliary switch structure)
5	Coil type: D-Single coil; H-With coil economizer; K- Двойная магнитная фиксация (одинарная катушка, двойная фиксация); 2К-Three joint magnetic retention (Double coil, Three joint self-locking); P-Signal control; R-Built-in pre charging type [relay drive] (the left digit of the pre charging function is the pre charging delay time, used to control the coil, the right digit is the resistance value with resistance); Y-External pre charging [MOS driver] (The left digit of the pre charging function is the pre charging delay time, and the right digit is used as a lead for controlling the coil. If it is greater than 1, it is the resistance value of the live resistance)
6	Coil outgoing mode: X-Wire (390mm); O-Other
7	Mounting bracket type: L-Vertical (default); M-Горизонтально
8	None: Auxiliary switch and main contact have the same structure (default); 2: The structure of auxiliary switch and main contact is opposite; 3: Special auxiliary switch structure
9	Other special functions: V-With capacitive type load; N-No polarity
10	Номинальное напряжение катушки: 12 В, 24 В, 36 В, 48 В, 60 В, 72 В и т. д.

ПРИМЕНЕНИЕ

The utility model has several significant advantages, including that it is equipped with a normally open contact. This unique design feature makes it particularly suitable for a variety of application scenarios, such as charging piles, electric four-wheel vehicles, new energy vehicles, energy-saving and environmental protection systems, road traffic lighting systems, as well as programmable power supplies and uninterruptible power supply equipment. Due to its flexibility and efficiency, this product can meet the needs of different users, provide reliable power solutions, and ensure safe and stable operation in various environments. In addition, its structural design also takes into account user convenience, making the installation and maintenance process simpler and more efficient.

TECHNICAL PARAMETERS: (Version 3.02)

SAYOON Тип продукта	HEV600
Форма обратной связи	1 NO(SPST-NO) or 1NC(SPST-NC)
Номинальное напряжение катушки (постоянный ток, В)	12V,24V,36V,48V,60V,72V,84V etc.
Напряжение прикосновения (постоянное напряжение, В)	200V,1000V
Contact circuit rated load current (DC-1)	600А
Типичное падение напряжения на контактах на каждые 100 А	>80 мВ
Напряжение срабатывания при отпускании при температуре (20±5)℃ (В)	≯70%
Напряжение отпускания при (20±5)℃ (В)	≯35%,≮5%
Working voltage range of 40℃ coil	0.8-1.2 мкс
Время отпускания (размыкание замыкающих контактов)	80ms
Время срабатывания (замыкание нормально разомкнутых контактов)	20ms
Максимальное время дребезга для контактного соединения	10 мс
Максимальное время дребезга при размыкании контакта	7ms
Сопротивление изоляции	100MΩ
Электрическая прочность на сопротивление	50Hz/60Hz 2200VAC 1minute
Типичные токи повреждения, которые могут быть отключены	1500 А / 5 мс при 48 В постоянного тока
Мощность катушки (Вт)	H: Start 30-60, Keep 4-10
Повышение температуры катушки (К)	≤45
Повышение температуры на выходе (K)	≤65
Электрическая жизнь	20 000 раз
Срок службы механических частей	300 000 раз
Техническое задание	Непрерывный
Контактный материал	Alloy
Время пускового тока (макс.)	130ms
Maximum switching current	2500A 320VDC (more than once)
Maximum switching power	800kW
Тип терминала нагрузки	Винт М10
Тип клеммы катушки	0.3 square silicone wire, 390mm long
Номинальная нагрузка вспомогательного контакта (опция)	3A/30VDC
Сертификация организаций, осуществляющих испытания	CE,FCC,RoHS

Note: Depending on the customer’s different usage environments, the focus of functions may vary. In order to improve the overall performance and adaptability of the product, Sanyou may make necessary parameter adjustments to coil specifications, temperature rise and other related factors. These adjustments are designed to ensure that the product performs optimally in a variety of conditions and meets the specific needs of the user. It should be noted that the above parameters are for reference only, and the specific application results may vary depending on the environment and usage conditions. For more details, see the SAYOON DC Contactor Selection and Use Guide, which provides important insights and advice to ensure you are able to take full advantage of the product and ensure it performs well in your specific application.

НАГРУЗОЧНАЯ ХАРАКТЕРИСТИКА

СХЕМА МОНТАЖА

СХЕМА ПОДКЛЮЧЕНИЯ

COIL TEMPERATURE CURVE

МЕХАНИЧЕСКИЕ НАВЫКИ и ИСПОЛЬЗОВАНИЕ ОКРУЖАЮЩЕЙ СРЕДЫ

Момент затяжки контактного вывода M10 (Н·м)	≯20,5 подходит
Coil lead mode	Wire dipping tin (red positive and black negative)
Температура окружающей среды	-40~+85℃
Относительная влажность	+20 °C 98%
Частота колебаний в неподвижном положении	3G, 1–50 Гц, амплитуда 0,5 мм
Сотрясение мозга	(60–100) раз/мин, ускорение ≤ 4g
Высота	2000 м
Инструкция по установке	Случайный
Международная защита	IP68

Инструкция по заказу

SAYOON Тип продукта	HEV600
У.Н.В.	1568g
Тип монтажного кронштейна	L Vertical(default),M Horizontal

When placing your order, please be sure to clearly indicate the following basic information: product name, complete model number, control coil voltage specification, mounting frame type, whether auxiliary contacts are required and the required order quantity. For example, you can specify: “High voltage DC contactor HEV600-□-□/24V, 100 pieces”, which means the load rated current is 600A, there is no auxiliary contact, the default installation bracket is, and the coil control voltage is 24V. Total order 100 pieces. Additionally, for products with special voltage specifications, customers may request special orders to meet their specific needs. This information will help us process your order accurately and efficiently, ensuring you receive the correct product tailored to your requirements.