{"id":4174,"date":"2026-11-09T19:00:00","date_gmt":"2026-11-09T11:00:00","guid":{"rendered":"https:\/\/sayoon-dc.com\/?p=4174"},"modified":"2026-11-09T00:18:21","modified_gmt":"2026-11-08T16:18:21","slug":"dc-contactor-imds-material-data-sheet-review","status":"publish","type":"post","link":"https:\/\/sayoon-dc.com\/vi\/blog\/dc-contactor-imds-material-data-sheet-review\/","title":{"rendered":"Xem x\u00e9t B\u1ea3ng D\u1eef li\u1ec7u V\u1eadt li\u1ec7u IMDS c\u1ee7a B\u1ed9 ti\u1ebfp x\u00fac DC"},"content":{"rendered":"<p>A DC contactor IMDS material data sheet review should connect the customer&#8217;s requested part, the supplier&#8217;s submitted MDS identity and version, the covered construction and the recipient&#8217;s review status. A PDF material list, an MDS number without a version or a submission sent to the wrong organisation does not complete that chain. Confirm what the customer requires, who owns the supplier data and which open questions must be resolved before the material-data deliverable is accepted. Keep that acceptance separate from electrical qualification and production-part approval.<\/p>\n<p>This guide addresses automotive supply-chain documentation. It does not claim that a Sayoon model has an accepted IMDS entry or disclose its material composition. IMDS instructions, customer requirements and the authorised parties control the actual submission. The workflow below helps purchasing teams request and track evidence without inventing substances, component weights or customer acceptance.<\/p>\n<h2>Confirm the customer&#8217;s requirement first<\/h2>\n<p>Ask whether IMDS is required for the particular order, which customer organisation should receive the submission and which customer part number must be used. Record the requested timing and any customer-specific instructions. A broad statement that an application is automotive does not tell the supplier everything needed to prepare a correct submission for a particular recipient.<\/p>\n<p>Identify the responsible people on both sides. Purchasing may coordinate the request, while the supplier&#8217;s material-data owner prepares the MDS and the customer reviews it. Do not give an intermediary permission to create material information by guessing from a catalogue. The person preparing the data needs the actual supplier evidence and knowledge of the supplied construction.<\/p>\n<h2>Understand what IMDS does and does not establish<\/h2>\n<p>The official IMDS public pages explain that the system supports material information through automotive supply chains. They direct users to recommendations, training and current system information. An MDS is part of that information process. It is not a contactor datasheet, an electrical endurance report or an independent certificate that the installed equipment meets every safety requirement.<\/p>\n<p>Keep related deliverables visible but distinct. A project may also need a drawing release, sample validation, a customer part-approval package and substance declarations. One accepted record does not automatically close all those activities. The purchasing tracker should show the status of the material-data task alongside the separate owners of technical and production approval.<\/p>\n<figure><img decoding=\"async\" loading=\"lazy\" src=\"https:\/\/sayoon-dc.com\/wp-content\/uploads\/2026\/05\/czw100a_s1-1-2.webp\" alt=\"SAYOON DC contactor product view\"><\/figure>\n<h2>Match the full supplied configuration<\/h2>\n<p>Record the manufacturer ordering code, customer part number, revision and relevant options. Clarify the boundary of the supplied item: contactor alone, contactor with a connector or an assembly containing additional accessories. Ask the data owner which configuration the MDS represents. A material structure prepared for one version should not be assumed to cover every option in a catalogue family.<\/p>\n<p>Where several codes share an entry, request the supplier&#8217;s explanation of the covered scope and have the recipient evaluate it under the applicable instructions. Do not create an umbrella statement simply to reduce administration. An apparently convenient grouping can become a problem if nobody can establish which construction and material data apply to an actual delivered item.<\/p>\n<div class=\"sy-table-wrap\">\n<table>\n<thead>\n<tr>\n<th>Review stage<\/th>\n<th>Evidence or question<\/th>\n<th>Responsible party<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Requirement<\/td>\n<td>Customer part and recipient instructions<\/td>\n<td>Customer<\/td>\n<\/tr>\n<tr>\n<td>Identity<\/td>\n<td>Manufacturer code and covered options<\/td>\n<td>Supplier<\/td>\n<\/tr>\n<tr>\n<td>Entry<\/td>\n<td>MDS ID, version and supplier organisation<\/td>\n<td>Data owner<\/td>\n<\/tr>\n<tr>\n<td>Status<\/td>\n<td>Prepared, sent or recipient accepted<\/td>\n<td>Authorised users<\/td>\n<\/tr>\n<tr>\n<td>Change<\/td>\n<td>Configuration and data-version relationship<\/td>\n<td>Supplier\/customer<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>This table is an editorial purchasing register, not a regulatory acceptance specification. Apply the official references below and the actual project requirements.<\/p>\n<h2>Collect the MDS identifier and version<\/h2>\n<p>Ask for the MDS ID and version, supplier organisation identity and recipient details needed to locate the actual submission. Keep these fields together in the project record. A file named latest material declaration is difficult to reconcile later if it contains no usable identifier or if a newer version has replaced the one the customer reviewed.<\/p>\n<p>Record the state accurately. Data being prepared, internally released, sent to a recipient and accepted by that recipient are different milestones. Do not mark the purchasing task complete just because the supplier has created an entry. Ask the responsible recipient for the relevant status or evidence through the authorised process, without requesting passwords or private account credentials.<\/p>\n<h2>Review the structure at the appropriate level<\/h2>\n<p>The official system distinguishes components, semi-components, materials and basic-substance information. The supplier&#8217;s trained data owner should apply the current recommendations and customer instructions. A purchasing reviewer can check that the declared scope corresponds to the supplied item and that obvious identity questions are resolved, but should not rebuild the material tree from the contactor&#8217;s appearance.<\/p>\n<p>Ask how the information was obtained and which upstream records support it. Do not infer a polymer grade from its colour or a terminal alloy from a photograph. If a sub-supplier has not provided required data, keep that gap visible and assign responsibility. Filling an unknown branch with plausible percentages can create a convincing-looking record that does not describe the actual product.<\/p>\n<h2>Check mass and configuration consistency<\/h2>\n<p>Where mass information is part of the review, compare the declared scope with the actual supplied configuration and controlled product information. Differences can arise from accessories, a different variant or the basis of a value. Ask the data owner to explain a discrepancy rather than imposing an arbitrary tolerance taken from an unrelated guide.<\/p>\n<p>Keep units and basis clear. A net component mass and a shipping weight are different quantities. Packaging or several units in a carton should not quietly become the declared mass of one contactor. The responsible IMDS user should evaluate the data according to the current recommendations and customer criteria; this article does not set universal mass or composition acceptance limits.<\/p>\n<h2>Treat errors and warnings as questions to resolve<\/h2>\n<p>Ask the supplier to complete the relevant system checks and explain unresolved messages. A check result is part of the evidence, but it should not be confused with customer acceptance or an independent verification of the underlying chemistry. A structurally valid record can still refer to the wrong part or contain an unsupported supplier assumption.<\/p>\n<p>When a message appears, retain its exact context, entry identity and version. Have the trained user determine whether correction or a documented explanation is needed under current instructions. Do not advise a supplier to hide a warning by changing a material category or substance entry without a factual basis. The goal is correct data, not simply an empty warning screen.<\/p>\n<figure><img decoding=\"async\" loading=\"lazy\" src=\"https:\/\/sayoon-dc.com\/wp-content\/uploads\/2026\/05\/czw100a_s1-1-2.webp\" alt=\"SAYOON DC contactor product view\"><\/figure>\n<h2>Handle confidential information through approved routes<\/h2>\n<p>Material reporting may involve information that suppliers cannot circulate freely in ordinary email. Agree which identifiers, status evidence and scope explanation purchasing needs, and let the authorised data owners use the appropriate system and confidentiality arrangements. Avoid asking staff to share credentials or export information they are not authorised to disclose.<\/p>\n<p>Confidentiality should not be used to conceal an unresolved identity question. The supplier can usually explain what product and version a submission covers without publishing its entire manufacturing recipe. If the customer needs more detail, arrange a discussion between the responsible specialists. Keep the outcome in the purchasing record at a level that is both useful and authorised.<\/p>\n<h2>Respond to a rejected submission methodically<\/h2>\n<p>Obtain the recipient&#8217;s actual rejection reason and connect it to the MDS ID, version and customer part. Separate an identity or recipient-code error from a question about material structure or supporting data. Send the precise issue to the responsible supplier user. A generic request to resubmit can waste time if the supplier does not know which requirement the recipient believes is unmet.<\/p>\n<p>Record the corrected version and the evidence of the next review outcome. Do not overwrite the history in a way that makes the rejection and correction impossible to understand. If the parties disagree about applicability, escalate through the customer and supplier specialists. Purchasing should coordinate the resolution rather than invent an interpretation of a recommendation to force acceptance.<\/p>\n<h2>Control later construction and data changes<\/h2>\n<p>Ask how the supplier identifies changes affecting the submitted construction or material information. Connect any proposed update to the actual ordering codes and deliveries. The current IMDS instructions and customer process determine what update or resubmission is required. Do not assume either that every small product change requires an identical procedure or that an unchanged part number makes an earlier entry permanently sufficient.<\/p>\n<p>Maintain the link between the approved product configuration and the data version used for the project. Where old and new constructions coexist, clarify which record applies to each. The change review should also consider separate electrical or production approval tasks if they are affected; an updated MDS alone cannot release a modified contactor for an unassessed installation.<\/p>\n<h2>Close the purchasing deliverable accurately<\/h2>\n<p>A useful completion record names the supplier and customer part, MDS ID and version, recipient, reviewed status, covered configuration and remaining exclusions. Include the date and responsible contact. If the submission is still awaiting recipient review, say so. A sent record belongs in the tracker, but it should not be presented as an accepted one.<\/p>\n<p>For a Sayoon enquiry, provide the full model and options and the customer&#8217;s specific material-data request. Ask which information and submission support are available for that configuration. The CZW100A illustrations here explain an evidence workflow; they show no real material tree and establish no IMDS acceptance. Obtain the actual project response before promising a completed data deliverable to the customer.<\/p>\n<h2>Educational video<\/h2>\n<p>Enviropass demonstrates creating an IMDS material data sheet report. The educational example is not a declaration for a Sayoon model, a substitute for current IMDS instructions or evidence of customer acceptance. No supplier service is endorsed.<\/p>\n<div style=\"aspect-ratio:16\/9\"><iframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/q4E_EyQ2_o8\" title=\"IMDS - How to create an MDS Report \ud83d\udee0\ufe0f \u2014 Enviropass\" loading=\"lazy\" allowfullscreen style=\"border:0;width:100%;height:100%\"><\/iframe><\/div>\n<p><a rel=\"noopener nofollow\" href=\"https:\/\/www.youtube.com\/watch?v=q4E_EyQ2_o8\" target=\"_blank\">Watch the educational video<\/a><\/p>\n<h2>Frequently asked questions<\/h2>\n<h3>Is a material declaration PDF the same as an accepted MDS?<\/h3>\n<p>No. It can be supporting information, but an accepted IMDS submission has its own identity, version, recipient and reviewed status. Track those fields through the authorised system process.<\/p>\n<h3>Can purchasing estimate the internal materials from a photograph?<\/h3>\n<p>No. Appearance cannot establish material grades, plating or substance percentages. The supplier&#8217;s trained data owner needs actual construction and upstream material evidence.<\/p>\n<h3>Does customer acceptance prove electrical suitability?<\/h3>\n<p>No. Material-data acceptance and electrical qualification address different requirements. Keep drawing approval, sample testing and equipment application release under their separate responsible processes.<\/p>\n<h3>What should be done when an MDS is rejected?<\/h3>\n<p>Obtain the exact reason and record identity, assign the correction to the responsible user, and track the revised version and recipient outcome. Do not mark a resubmission accepted before the review result is confirmed.<\/p>\n<h2>Product and related guides<\/h2>\n<p>Start a model-specific enquiry using the <a href=\"https:\/\/sayoon-dc.com\/product\/czw100a-normally-open-dc-contactor\/\">CZW100A product identification reference<\/a>. Use the <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-selection-guide-key-factors-for-reliable-motor-control\/\">DC contactor selection guide<\/a> for electrical selection. Complementary reading: <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-ppap-automotive-projects\/\">DC Contactor PPAP Requirements for Automotive Projects<\/a>, <a href=\"https:\/\/sayoon-dc.com\/blog\/dc-contactor-reach-svhc-document-review\/\">DC contactor REACH and SVHC declarations: document scope before approval<\/a>.<\/p>\n<h2>Official references and scope<\/h2>\n<ul>\n<li><a rel=\"noopener nofollow\" href=\"https:\/\/public.mdsystem.com\/en\/web\/imds-public-pages\/new2imds\" target=\"_blank\">Official IMDS: new-user guidance<\/a><\/li>\n<li><a rel=\"noopener nofollow\" href=\"https:\/\/public.mdsystem.com\/en\/web\/imds-public-pages\/faq\/-\/asset_publisher\/AuVyF7A3kM3i\/content\/imds-ent-1\" target=\"_blank\">Official IMDS: entry questions and structure guidance<\/a><\/li>\n<\/ul>\n<p>Consult each source in its stated jurisdiction and application context. General guidance does not establish the status of a particular Sayoon product, shipment, declaration or customer submission.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is a material declaration PDF the same as an accepted MDS?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It can be supporting information, but an accepted IMDS submission has its own identity, version, recipient and reviewed status. Track those fields through the authorised system process.\"}}, {\"@type\": \"Question\", \"name\": \"Can purchasing estimate the internal materials from a photograph?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Appearance cannot establish material grades, plating or substance percentages. The supplier's trained data owner needs actual construction and upstream material evidence.\"}}, {\"@type\": \"Question\", \"name\": \"Does customer acceptance prove electrical suitability?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Material-data acceptance and electrical qualification address different requirements. Keep drawing approval, sample testing and equipment application release under their separate responsible processes.\"}}, {\"@type\": \"Question\", \"name\": \"What should be done when an MDS is rejected?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Obtain the exact reason and record identity, assign the correction to the responsible user, and track the revised version and recipient outcome. Do not mark a resubmission accepted before the review result is confirmed.\"}}]}<\/script><\/p>\n<style>.sy-pro-article-main{min-width:0;max-width:100%}.sy-pro-article-main>*{max-width:100%}.sy-table-wrap{max-width:100%;overflow-x:auto}.sy-table-wrap table{min-width:650px;width:100%;border-collapse:collapse}.sy-table-wrap td,.sy-table-wrap th{padding:12px;border:1px solid #d5dce4;text-align:left;vertical-align:top}figure{margin:24px 0}figure img{max-width:100%;height:auto}<\/style>\n","protected":false},"excerpt":{"rendered":"<p>Xem x\u00e9t c\u00e1c b\u00e0i n\u1ed9p IMDS c\u1ee7a b\u1ed9 ti\u1ebfp x\u00fac DC b\u1eb1ng c\u00e1ch s\u1eed d\u1ee5ng ch\u00ednh x\u00e1c nh\u1eadn d\u1ea1ng b\u1ed9 ph\u1eadn, phi\u00ean b\u1ea3n MDS, tr\u1ea1ng th\u00e1i ng\u01b0\u1eddi nh\u1eadn v\u00e0 b\u1eb1ng ch\u1ee9ng v\u1eadt li\u1ec7u ph\u00f9 h\u1ee3p v\u1edbi c\u1ea5u h\u00ecnh.<\/p>","protected":false},"author":4,"featured_media":4300,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[61],"class_list":["post-4174","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-dc-contactor-engineering"],"blocksy_meta":{"styles_descriptor":{"styles":{"desktop":"","tablet":"","mobile":""},"google_fonts":[],"version":7}},"_links":{"self":[{"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/posts\/4174","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/comments?post=4174"}],"version-history":[{"count":4,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/posts\/4174\/revisions"}],"predecessor-version":[{"id":5064,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/posts\/4174\/revisions\/5064"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/media\/4300"}],"wp:attachment":[{"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/media?parent=4174"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/categories?post=4174"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sayoon-dc.com\/vi\/wp-json\/wp\/v2\/tags?post=4174"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}