JK12A Hall Effect Accelerator Pedal: Output & Wiring

The SAYOON JK12A is a hall effect accelerator pedal for an electric vehicle motor-controller input. Match the supply, output-voltage range and signal direction to the controller input; a matching connector alone does not ensure compatibility.

Output examples
0.8-4.2V / 0-5V
Output type
Voltage
Wire length
270 mm
Pedal travel
16 degrees
Installation
Suspension
Sensor type
Hall effect

Controller compatibility & wiring

Use this pedal for the foot-speed-control applications listed below. Confirm the controller input specification, idle and full-travel signals, pin assignment, connector and cable routing. Check the return action and any switch signals during system setup before operating the vehicle.

Configure your JK12A pedal

For JK12A, send the controller input diagram, supply voltage, desired output range and direction, connector pinout, cable length, mounting position and quantity. Request the matching wiring diagram and output specification before ordering. See the technical information and drawings below for further details.

Overview

FEATURES

Pedal accelerator pedal device is through one of the most important components of motor controller management operation, its quality determines the user driving reliability and comfort. The company accelerator has the following characteristics: 1 Mechanical and electronic signal, logic signal, to prevent runaway. 2 of the three torsion spring design, reasonable structure, prevent speed, high safety. 3 waterproof and anti vibration, suitable for a variety of vehicle environment. 4 imported programmable Holzer components, you can output any voltage, temperature drift is small, the work is stable. 5 non contact type induction work, no wear, long life. 6 the output curve is reasonable, the vehicle control freely.

SAYOON MODEL IMPLICATION

JK12
A
-0

0

3

-B

-27

1

2

3

4

5

6

7

1

Product type

2

 

Installation type

 

3

Hall input voltage: 0: 0-5v; 1: 12V; 2: 24V; 3: 36V; 4: 48V; 6: 60V; 7: 72V; 8: 84V; 9: 96V

4

Output voltage: 0: 0-5V; 1: 0.8-4.2V; 4: 4.2-0.8V; 5: 5-0V

5

Total number of conductors: 3; 4; 5

6

Plug type: 2.8p: 2.8 insert(C, D); 2.8h: 2.8 snap spring; 6.3p: 6.3 insert (P); 6.3h: 6.3 snap spring (A)

7

Wire length (CM)

USES

Foot speed control for electric vehicles, electric tricycles, trucks, recreational vehicles, classic cars, brick cars, solar boats

TECHNICAL PARAMETERS: (Version 1.41)

 SAYOON Product Type

JK12A

 Input voltage  5V,10V,12V,24V,36V-84V,96V, Any voltage
 Output  0.8-4.2v;0-5V;5-0V;4.2V-0.8V;0-10V;10-0V
 Output rated load current  10mA
 Output type  Voltage
 Wire length  270 mm
 Pedal rotation angle  16 degrees
 Maximum permissible load current  ≤10mA
 Pedal starting force  20N±5N
 Pedal stop force  35N±5N
 Switch signal maximum permissible load  100mA
 Installation form  Suspension

Note: The main components of this product use Hall sensors and strong magnets, and interference caused by environmental electromagnetic waves and temperature should be avoided as much as possible during use. If used as signal sampling, it should be filtered before use. Please refer to the Hall parameters for the tolerance of the product output. If there are any selection issues, please contact our technical personnel.

INSTALLATION DIAGRAM

jk12a

WIRING DIAGRAM

jk12a_e

OTHER WIRING DIAGRAM

jk12a_1_e

MECHANICAL ABILITY and USE of the ENVIRONMENT

 Ambient temperature  -30~+85℃
 Relative humidity  <95%
 the vibration frequency of the fixed  3G, 1 ~ 50Hz 0.5mm amplitude
 Altitude  2000m
 Installation direction  Random
 International protection  IP68

ORDER INSTRUCTION

SAYOON Product Type

 JK12A

 U.N.W.  373g
 Package QTY.  50pcs
Please specify the following information when placing an order: name, complete model, and quantity ordered. For example: JK12A-003-B 0.8-4.2V 100 pieces. Special output voltage specification products can be ordered by users if needed.

Request a Custom Quote

Interested in this product? Fill out the form below and our sales team will get back to you within 24 hours.

Contact Form
WhatsApp
WhatsApp QR Code
WeChat
WeChat Code
Phone
+86 130 5791 2357
Email
sayoon@sayoon.com